Product
Home >Product >Traditional products Rapid Heat & Cool Mold Temperature Controller Series
Steam control mold temperature machine
For the LCD TV, LCD computer, LCD monitors, lights and optical instruments and other industries, in addition to flat-panel TV panels, this technology can also be widely used in computer LCD monitors, air conditioners, automotive interiors and other appliances, Automotive, communications, medical and other industries.


Steam control mold temperature machine Description:

       Steam control mold temperature machine, also known as conversion machine or switch. Specifically designed to address the quality issues of injection molded products such as weld marks, corrugations, floating fibers, optical orientation differences, shrinkage, lack of material and stress concentration, a number of technical measures have been taken to optimize the mold design, such as optimizing the cavity and Waterway layout), optimization of injection processes (including control of mold temperature, firing rate and pressure, and pressure and fill, etc.), as well as with hot runner technology, gas-assisted technology and heat treatment technology. Nevertheless, these technical measures are still difficult to fundamentally solve the problem. The post-painting process, although compensating for the above drawbacks, often leads to higher costs and rejects, and its production is not environmentally friendly (including benzene). As a new technology developed in recent years, the high-gloss no-melting injection molding system has become a new solution to the above problems.

转换机.png





Steam control mold temperature machine uses:

       For the LCD TV, LCD computer, LCD monitors, lights and optical instruments and other industries, in addition to flat-panel TV panels, this technology can also be widely used in computer LCD monitors, air conditioners, automotive interiors and other appliances, Automotive, communications, medical and other industries.



Steam control mold temperature machine working principle:

      The use of equipment to produce steam or high temperature water and cooling water, to control the mold temperature during a molding cycle, so that both the advantages of both methods to play. First of all, by injecting steam or high temperature water before injection molding, the temperature of the mold reaches a temperature higher than that of the resin, and then the injection of the plastic begins. As a result, a molded product with no surface (water line) and good surface quality is formed. After the plastic injection is completed, the cooling process is started immediately. With cooling water, the mold temperature rapidly drops below the temperature at which the resin is thermally deformed. In this way, you can speed up the resin curing speed, to shorten the molding cycle, to solve the deformation, shrinkage and other issues.



Steam control mold temperature machine work diagram:


高光机工作示意图.jpg




Steam control mold temperature machine features:

 

1, Mitsubishi touch-computer control, full Chinese interface, easy to operate;

2, the closed-loop system control the temperature of the input and output testing, mold temperature feedback to the actual PLC, digital color display changes to ensure accurate and stable output;

3, high temperature steam, cold water, air temperature and pressure six alarm, with time and action and injection molding machine signal interlock;

4, single change mold temperature detection (optional), the input and output pipes with immortal steel, multi-group input and output interfaces.



Steam control mold temperature advantages:

 

1, can completely remove the product surface watermarks, welding marks, silver lines;

2, plastic products can solve the problem of surface shrinkage;

3, improve the surface finish of the product, make the glossy finish of the product reach the mirror effect;

4, optical products do not need injection processing, response to environmental protection, improve the finished product rate of 20-30%;

5, in the case of rapid cooling speed, so that the molding cycle is greatly reduced.



After receiving the notification of customer repair, Guangdong Province, arrived within 24 hours on-site maintenance, outside the province 72 hours rushed to the scene and solve the problem.

In Soxi, service is a rigorous and pragmatic work attitude, which covers smooth communication, strict quality control, and improve after-sales work.


Any questions please contact:

Company:ShenZhen Soxi Machinery Equipment Co.,Ltd.

Person Incharge:Mr. Deng

TEL:0755-27189827   

Mobile:13825279198  

Fax:0755-27189907 

Email:szsoxi@126.com   

Q  Q:1041280926   

Address:ShenZhen City BaoAn District GuanLan Town FuMin XianWu Industrial Park No.122